Tactical Plate Carrier Vest FREE Made With Kevlar Plates 3a Inserts Fits Ar500

Posted on: September 6, 2024 /

Categories: tactical

Tactical Plate Carrier Vest FREE Made With Kevlar Plates 3a Inserts Fits Ar500

This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor. Your purchasing a tactical plate carrier. The vest has large pocket for large panels inserts plates and a smaller pocket for your hard armor like ar500. I do have other listings that include ar500 steel hard armor. Free Second chance/safariland level 3a used front and rears used made with Kevlar/aramid bulletproof blend dated 2020. Kevlar covers will be removed to protect the privacy of the officers and and agencies. Manufacture by safariland 2020. Threat level 3a llla. Sizes are medium large and maybe XL if your chest and belly size is 44 and under measured by measuring tape across nipple line and around and belly button and around. YOU ARE 18 years of age. YOU ARE NOT A FELON. Residents of Connecticut are prohibited from purchasing Body Armor.
Tactical Plate Carrier Vest FREE Made With Kevlar Plates 3a Inserts Fits Ar500

Share

Condor 201039 Tactical Plate Carrier Vest with AR500 Level III Advanced Armor

Posted on: August 23, 2024 /

Categories: condor

Condor 201039 Tactical Plate Carrier Vest with AR500 Level III Advanced Armor

Condor 201039 Gunner Plate Carrier New with tags. Comes with installed AR500 Level III Body Armor (chest and back). I got the armor new in 2018 and installed myself. Tried on once to ensure fit and then stashed in my “Go Kit” closer. Lower back issues preclude my using in future so it is looking for a new home. USA Lower 48 Sales only. Always willing to negotiate.
Condor 201039 Tactical Plate Carrier Vest with AR500 Level III Advanced Armor

Share

Tactical Plate Carrier Vest FREE Made With Kevlar Plates 3a Inserts Fits Ar500

Posted on: August 18, 2024 /

Categories: tactical

This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor. Your purchasing a tactical plate carrier. The vest has large pocket for large panels inserts plates and a smaller pocket for your hard armor like ar500. I do have other listings that include ar500 steel hard armor. Free safariland level 3a used front and rear used made with Kevlar/aramid bulletproof blend dated 2020. Kevlar covers will be removed to protect the privacy of the officers and and agencies. Manufacture by safariland 2020. Threat level 3a llla. This is not a military item! Sizes are small medium large and maybe XL if your chest and belly size is 44 and under measured by measuring tape across nipple line and around and belly button and around. We have adapter to expand to 48 belly of needed. YOU ARE 18 years of age. YOU ARE NOT A FELON. Residents of Connecticut are prohibited from purchasing Body Armor.
Tactical Plate Carrier Vest FREE Made With Kevlar Plates 3a Inserts Fits Ar500

Share

Fits aR500 BULLETPROOF Carrier Tactical Vest Made With Kevlar Plates 3a Inserts

Posted on: August 8, 2024 /

Categories: fits

Fits aR500 BULLETPROOF Carrier Tactical Vest Made With Kevlar Plates 3a Inserts

M L XL 3XL 3XL 4XL. This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor. Brand New plate carrier vest. The vest has large pocket for large panels inserts plates and a smaller pocket for your hard armor like ar500. I do have other listings that include ar500 steel hard armor. Free Threat level level 3a used front and rears lightly used made with Kevlar/aramid bulletproof blend dates range 2019- 2020. The free bulletproof plates fill the body and sides of the vest. Kevlar covers will be removed to protect the privacy of the officers and and agencies. Manufactured by companies like GH, galls, safariland second chance, and Armor express. Threat level 3a llla. This not a military item. Sizes are medium large xl xxl 3x 4x if your chest and belly size is 44 and under measured by measuring tape across nipple line and around and belly button and around. YOU ARE 18 years of age. YOU ARE NOT A FELON. Residents of Connecticut are prohibited from purchasing Body Armor.
Fits aR500 BULLETPROOF Carrier Tactical Vest Made With Kevlar Plates 3a Inserts

Share

AR500 Vest Gunner Butt Plate Black And Other Colors Free Shipping

Posted on: July 29, 2024 /

Categories: ar500

AR500 Vest Gunner Butt Plate Black And Other Colors Free Shipping

AR500 Gunner Butt Plate And 6″x12″ Carrier. Black, Tan, OD Green, Multicam. 6″x12″ level 3 plus plate, mounts on rear of vest with molle straps. Contact about other colors when ordering. Vest Carrier not included.
AR500 Vest Gunner Butt Plate Black And Other Colors Free Shipping

Share

Complete Level III AR500 Steel Body Armor With Dual Pocket Lightweight Vest

Posted on: July 7, 2024 /

Categories: complete

Complete Level III AR500 Steel Body Armor With Dual Pocket Lightweight Vest

Has taken the armor plate carrier to the next level. Convertible dual pocket design which can accommodate either a 8″x 10″ or 10″ x 12″ single plate. Our lightweight quick donning carrier vest complete with 10″ x 12″ or 8″ x 10″ AR500 Level III plate. Fits sizes from Medium through XXlarge. Weighing in at only 1.5 pounds empty is our most lightweight carrier. Tactical Scorpion Gear Lightweight carrier vest. This vest provides pockets for the front and rear armor up to 10? X 12? . Made of 600D nylon. This vest comes complete with armor. This is a Tactical Scorpion Gear exclusive design. Plate weights: 10×12: 135 ounces 8×10: 91 Ounces. Made for quick and easy placement for in case of emergency. Armor type: Complete with 2 AR500 steel Level III plates in the size of your choice. Size: Fully adjustable shoulder straps and girth. Small to XXLarge. Dual pocket design with Velcro. Quick donning / doffing with no clips or fasteners to fuss with. Tactical Scorpion Gear AR500 steel plate armor. (Made in the USA). A stand alone armor plate with multiple hit capability. Fully encapsulated to protect against corrosion, chemicals and sweat. Full spall build-up coating available for additional charge. Fully tested by independent Lab. Rated for up to six hits from 7.62 Nato bullets. 308 Winchester with velocities up to 2780 fps. For front and/or back protection. 10 x 12 plate weighs 8 pounds each. We utilize a CNC laser cutting table for the cutting of all our AR500 products. Plasma cutting cuts slowly, this puts a lot of heat into the steel. (Submerged plasma cutting machine is no better) This excess heat can result in excessive chipping and damage near the cut edge during use and easily shattering when shot. Plasma cutting generates large amounts of heat that is deposited into the target, softening it’s edges. The heat-affected zone (HAZ) generated by plasma cutting is the largest out of the most commonly used methods for cutting abrasion resistant steel. Most AR500 is cut with plasma cutters as they are cheap and relatively small compared to other methods. Our Curved plate is bent on a custom laser cut die set with single radius bend, not bent multiple times on a press brake. Here at Tactical Scorpion Gear we manufacture our own vest carriers, aramid level IIIA vests and all our products. This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor. NIJ tested Level III Armor will defeat 6 rifles round shots up to 7.62×51/. By purchasing the body armor contained in this listing from East West Consolidated, LLC, d/b/a Tactical Scorpion Gear. Agree to be bound by the following terms and conditions. Purchaser represents that s/he is at least 18 years old or the age of majority in the State or Territory in which s/he resides. Purchaser is encouraged to seek qualified legal counsel in his/her jurisdiction if Purchaser has any questions concerning ab federal, state, or local laws. S violation of any federal, state, or local law concerning the Purchaser. S body armor is tested to withstand bullets, the armor is bullet resistant and not bulletproof. Body armor will not protect someone from injury or death in all circumstances. Body armor will not provide any protection for the parts not covered by the armor. Purchaser acknowledges that there is always a risk of injury, including serious injury or death, if struck by a bullet while wearing body armor. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. These Terms and Conditions may be updated, revised, or changed without prior notice.
Complete Level III AR500 Steel Body Armor With Dual Pocket Lightweight Vest

Share

Tactical Scorpion Gear Level III+ / AR500 Body Armor Plates Surcat 3A Molle Vest

Posted on: June 16, 2024 /

Categories: tactical

Tactical Scorpion Gear Level III+ / AR500 Body Armor Plates Surcat 3A Molle Vest

Level IIIA MOLLE Armor Vest Bulletproof Ballistic TSG-VE022. Level IIIA Molle Armor Vest Bulletproof Ballistic TSG-VE022. Armor plates made In USA by our own Craftmen. Tactical Scorpion Gear Level IIIA MOLLE Vest. This vest provides protection for the Front, Back, Side and Shoulder Protection. Meets full Level IIIA compliance. The product is corrosion-resistance. Great low temperature resistant performance. Easy adjustment for waist and shoulders. Has external pockets on front and back for the addition of optional 10×12 plates if you want to increase ballistic protection (holds up to one inch thick) Fast and easy to simply “drop”in hard plates for increased ballistic protection. This variation listing you can choose what protection level you want. This Surcat carrier comes with level IIIA panels automatically therefore even without hard plates it will still offer protection from hangun threats. You can choose to add hard armor plates to this set-up at a lower price than purchasing separately. Quality: Protection Level tested according to newest US NIJ protection Level: US NIJ 0101.06 IIIA. Removable inner soft armor plates. Has external pockets on front and back for the addiotnal of optional 10×12 plates if you want to increase ballistic protection. Armor material: Teijin aramid. Size – Large /Xlarge only. This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor. NIJ tested Level IIIA Armor will defeat 6 pistol round shots up to. 44 Mag HP – 1430 fps at 5 meters. 7.62mm NATO M80 FMJ. 7.62mm Caliber M2 AP. Both armor types are NIJ Certified. Tactical Scorpion Gear AR500 steel core armor. (Made in the USA). A stand alone armor plate with multiple hit capability. Fully tested by independent Lab. Rated for up to six hits from 7.62 Nato bullets. 308 Winchester with velocities up to 2780 fps. Tactical Scorpion Level III+ Lightweight Body Armor Curved Plate. Tactical Scorpion Gear Level III+ steel plate armor. We are Compliant with all NIJ standards so dont pay more for lesser quality products. A stand alone armor plate with multiple hit capability – Easily passed NIJ. 0.06 6 shot stand alone tests against 5.56 M855 M80 ball (greentip) and 5.56 XP193 55 Grain FMJ boattail. In house testing defeated 30-06 165 grain copper tip trophy. Base coat is fully encapsulated with 40 mils to protect against corrosion, chemicals and sweat. Optional Spall coat (build-up) is available on strike face. Fully tested by independent Lab to 6 shot stand alone tests against 5.56 M855 M80 ball (green tip) and 5.56 XP193 55 Grain FMJ boat tail. Simply Stronger, Thinner and lighter that the competition. Our new proprietary steel core is far stronger than the AR500 – AR650 steel core. This core is hardened all the way through unlike the AR500 – AR650 which is only surfaced hardened. At only 0.197 inches thick nominal makes it 20% lighter than the AR500 and superior in strength. Our build-up spall coating is done with a Graco EXP-2 which is the top of the line high pressure heated coating system. Our plate core is chemically washed and etched on the strike surface to eliminate the coating from delaminating when shot which keeps the shrapnel from escaping from the armored assembly. Tactical Scorpion Gear 10 mm Trauma Pad. Custom made, computer cut on triple axis CNC router machine to perfectly match our armor plate. Will absorb the impression of any projectile impact onto the armor plate protecting your ribs from the compression. This model complies with NIJ Standard-0101.06 for Ballistic resistance of Body Armor. By purchasing the body armor contained in this listing from East West Consolidated, LLC, d/b/a Tactical Scorpion Gear. Agree to be bound by the following terms and conditions. Purchaser represents that s/he is at least 18 years old or the age of majority in the State or Territory in which s/he resides. Purchaser is encouraged to seek qualified legal counsel in his/her jurisdiction if Purchaser has any questions concerning ab federal, state, or local laws. S violation of any federal, state, or local law concerning the Purchaser. S body armor is tested to withstand bullets, the armor is bullet resistant and not bulletproof. Body armor will not protect someone from injury or death in all circumstances. Body armor will not provide any protection for the parts not covered by the armor. Purchaser acknowledges that there is always a risk of injury, including serious injury or death, if struck by a bullet while wearing body armor. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. These Terms and Conditions may be updated, revised, or changed without prior notice.
Tactical Scorpion Gear Level III+ / AR500 Body Armor Plates Surcat 3A Molle Vest

Share

Tactical Scorpion Level III+ / AR500 Body Armor Bobcat 11×14 Concealed Vest

Posted on: June 3, 2024 /

Categories: tactical

Tactical Scorpion Level III+ / AR500 Body Armor Bobcat 11x14 Concealed Vest

Has taken the armor plate carrier to the next level. We have incorporated Cordura brand fabric to provide the wearer with the ultimate in a carrier vest. Double stitched seams and “X” stitching at all ends for the strongest construction. Heavy Duty double adjustable shoulder straps. Double closure Velcro and snap Plate pockets to keep them secure. Tactical Scorpion Gear Bobcat Concealable armor plate carrier vest. This vest provides pockets for the front and rear armor up to 11? X 14? . Heavy duty ITW style clips. This vest comes complete with armor. Made for quick and easy placement for in case of emergency. Sides adjust quickly with quick release hook and loop belting. Armor type: 11? X 14? Plates. Weight without armor: 11 ounces. Size: Fully adjustable shoulder straps and girth – Small to XXLarge. 4 loop on front and rear for insignias or hook accessories. Shoulder straps quickly adjust. Armor pocket design with Velcro and snap safety closures. Your choice of Level III AR500 or Lightweight Level III+ steel core armor plates. Tactical Scorpion Gear AR500 steel core armor. (Made in the USA). A stand alone armor plate with multiple hit capability. Fully tested by independent Lab. Rated for up to six hits from 7.62 Nato bullets. 308 Winchester with velocities up to 2780 fps. Tactical Scorpion Level III+ Lightweight Body Armor Curved Plate. Tactical Scorpion Gear Level III+ steel plate armor. We are Compliant with all NIJ standards so dont pay more for lesser quality products. A stand alone armor plate with multiple hit capability – Easily passed NIJ. 0.06 6 shot stand alone tests against 5.56 M855 M80 ball (greentip) and 5.56 XP193 55 Grain FMJ boattail. In house testing defeated 30-06 165 grain copper tip trophy. Base coat is fully encapsulated with 40 mils to protect against corrosion, chemicals and sweat. Optional Spall coat (build-up) is available on strike face. Fully tested by independent Lab to 6 shot stand alone tests against 5.56 M855 M80 ball (green tip) and 5.56 XP193 55 Grain FMJ boat tail. Simply Stronger, Thinner and lighter that the competition. Our new proprietary steel core is far stronger than the AR500 – AR650 steel core. This core is hardened all the way through unlike the AR500 – AR650 which is only surfaced hardened. At only 0.197 inches thick nominal makes it 20% lighter than the AR500 and superior in strength. Our build-up spall coating is done with a Graco EXP-2 which is the top of the line high pressure heated coating system. Our plate core is chemically washed and etched on the strike surface to eliminate the coating from delaminating when shot which keeps the shrapnel from escaping from the armored assembly. Tactical Scorpion Gear 10 mm Trauma Pad. Custom made, computer cut on triple axis CNC router machine to perfectly match our armor plate. Will absorb the impression of any projectile impact onto the armor plate protecting your ribs from the compression. This model complies with NIJ Standard-0101.06 for Ballistic resistance of Body Armor. By purchasing the body armor contained in this listing from East West Consolidated, LLC, d/b/a Tactical Scorpion Gear. Agree to be bound by the following terms and conditions. Purchaser represents that s/he is at least 18 years old or the age of majority in the State or Territory in which s/he resides. Purchaser is encouraged to seek qualified legal counsel in his/her jurisdiction if Purchaser has any questions concerning ab federal, state, or local laws. S violation of any federal, state, or local law concerning the Purchaser. S body armor is tested to withstand bullets, the armor is bullet resistant and not bulletproof. Body armor will not protect someone from injury or death in all circumstances. Body armor will not provide any protection for the parts not covered by the armor. Purchaser acknowledges that there is always a risk of injury, including serious injury or death, if struck by a bullet while wearing body armor. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. These Terms and Conditions may be updated, revised, or changed without prior notice.
Tactical Scorpion Level III+ / AR500 Body Armor Bobcat 11x14 Concealed Vest

Share

Tactical Bulletproof Vest withLevel III AR500 Plates

Posted on: May 7, 2024 /

Categories: tactical

Tactical Bulletproof Vest withLevel III AR500 Plates

Choose Upgraded Armor, Add Side Plates & Trauma Pads. Tactical Plate Carrier Features. Our T1 tactical plate carrier is made of high quality 1000D Cordura nylon that gives it excellent wear resistance, tear resistance, unmatched strength, light weight, softness and easy care. Quick release padded and reinforced shoulder straps adjustable with 6 inch -8 inch, length:14 inch, wide:12 inch, Waist adjustable with 29″-49″ to protect your sides with concealed hook-and-loop utility pockets. The Molle module system 3″ by 6″ patch panels at the front and back for your name patches and morale patches, Molle all around for your pouches, equipment, hydration pack, etc. Breathable detachable mesh padding for good airflow and all accessories can be disassembled and reorganized. X1 Integrated Removable Triple Panel Kangaroo Style Rifle Magazine Pouch. X2 Integrated Removable Double Kangaroo Style Rifle Magazine Side Pouches. X2 Molle Removable Single Kangaroo Style Radio/Rifle Magazine Pouches. X1 Molle Removable Triple Panel Kangaroo Style Pistol Magazine Pouch. X1 Molle Removable Utility Pouch. X1 Molle Removable Medic Pouch. X14 Shotgun Shell Holders. Our Tactical Edge & Armor Bundle Includes. X1 Tactical Edge & Armor T1 Tactical Plate Carrier (Choose Your Color). X2 Tactical Edge & Armor 10″ x 12″ AR500 Level III Single-Curve Steel Plates w/ Base Coat. Quick release padded and reinforced shoulder straps adjustable with 6″-8″. Quick release cummerbund adjustable from 34″-54″ (Small-3XL). AR500 Level III Body Armor Details. A stand-alone armor plate, with multiple hit capability. Shooter cut with base coat. Fully tested by independent Lab. Complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor. Listed on the Department of Justice NIJ certification website. Rated for up to six hits from 7.62 NATO round. 308 Winchester with velocities of up to 2780 fps. Made in the US A. Dimensions: 10 ” x 12″. Weight: 135 oz ea. Shotgun Shells and Magazines are not included.
Tactical Bulletproof Vest withLevel III AR500 Plates

Share

Tactical Scorpion Gear 4 Pc Level III AR500 Body Armor Plates Molle Vest Set-up

Posted on: May 6, 2024 /

Categories: tactical

Tactical Scorpion Gear 4 Pc Level III AR500 Body Armor Plates Molle Vest Set-up

Tactical Scorpion Gear 4 Pc Level III AR500 Armor Muircat Molle II Vest – Black. Has taken the armor plate carrier to the next level. We have incorporated a ventilated interior mesh to provide the wearer with the ultimate in cooling. Double stitched seams and “X” stitching at all ends for the strongest construction. We utilize Military grade Ripstop Nylon material for all the construction, even for the optional accessories. Heavy Duty straps and Clips are utilized throughout. Double closure Velcro and snap Plate pockets to keep then secure. Tactical Scorpion Gear Muircat Level III MOLLE carrier vest complete with curved AR500 plates. This vest provides protection for the front and rear plus both sides. Made of 600D and 1000D nylon. Heavy duty ITW style clips. This vest comes complete with our 10″ x 12″ and 6″ x 8″ sideplate curved AR500 rifle rated steel plate base coat armor. Easily and readily accepts all MOLLE accessories. Made for quick and easy placement for in case of emergency. Armor type: two curved 10″ x 12″ and two 6″x8″ AR500 level III steel armor base coat plates. Fully adjustable shoulder straps and girth – Fits Medium to XXXLarge. Shoulder straps quickly adjust. Dual pocket design with Velcro and snap safety closures. 7 MOLLE rows front and rear of vest. Optional accessories of MOLLE 3 mag capacity pouch and Medical style zippered pouch. Tactical Scorpion Gear AR500 steel plate armor. (Made in the USA). A stand alone armor plate with multiple hit capability. Fully encapsulated to protect against corrosion, chemicals and sweat. Full build-up spall coating available at extra cost. Fully tested by independent Lab. Rated for up to six hits from 7.62 Nato bullets. 308 Winchester with velocities up to 2780 fps. For front and/or back protection. We utilize a CNC laser cutting table for the cutting of all our AR500 products. (Please view our attached video). Plasma cutting cuts slowly, this puts a lot of heat into the steel. (Submerged plasma cutting machine is no better) This excess heat can result in excessive chipping and damage near the cut edge during use and easily shattering when shot. Plasma cutting generates large amounts of heat that is deposited into the target, softening it’s edges. The heat-affected zone (HAZ) generated by plasma cutting is the largest out of the most commonly used methods for cutting abrasion resistant steel. Most AR500 is cut with plasma cutters as they are cheap and relatively small compared to other methods. Our Curved plate is bent on a custom laser cut die set with single radius bend, not bent multiple times on a press brake. Here at Tactical Scorpion Gear we manufacture our own vest carriers, aramid level IIIA vests and all our products. This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor. NIJ tested Level III Armor will defeat 6 rifles round shots up to 7.62×51/. By purchasing the body armor contained in this listing from East West Consolidated, LLC, d/b/a Tactical Scorpion Gear. Agree to be bound by the following terms and conditions. Purchaser represents that s/he is at least 18 years old or the age of majority in the State or Territory in which s/he resides. Purchaser is encouraged to seek qualified legal counsel in his/her jurisdiction if Purchaser has any questions concerning ab federal, state, or local laws. S violation of any federal, state, or local law concerning the Purchaser. S body armor is tested to withstand bullets, the armor is bullet resistant and not bulletproof. Body armor will not protect someone from injury or death in all circumstances. Body armor will not provide any protection for the parts not covered by the armor. Purchaser acknowledges that there is always a risk of injury, including serious injury or death, if struck by a bullet while wearing body armor. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. These Terms and Conditions may be updated, revised, or changed without prior notice.
Tactical Scorpion Gear 4 Pc Level III AR500 Body Armor Plates Molle Vest Set-up

Share